Home | Merton's Links & Resources | Contact Us | Terms of Sale & Ordering Information | Shipping Information
 
 
 
 
epoxy and polyester resins fiberglass reinforcements additives and fillers fiberglassing tools and accessories floatation foam and cores bronze and stainless fastenings marine paints and compounds
 
 


  
Clear Coat Epoxy Resin

 

(Mixing Ratio 2 to 1)

Slow Cure
Penetrating Coating Resin
Lowest Viscosity
Best Brushing Properties

Extremely low viscosity, clear, water white, solvent-free “penetrating” epoxy system. Clear Coat is ideal for clear coating wood, and the wetting out of fiberglass cloth for bright finished boats. Use as a primer (base) for clear linear polyurethane or varnish coatings and as a penetrating first coat for blister repair on fiberglass boats. Use also for those applications that require a long pot life and low viscosity. Clear Coat cures to a brilliantly clear, very tough finish without the usual “amine blush” associated with some epoxy resin films. Clear Coat contains no volatile solvents. Sand and varnish Clear Coat resin in order to avoid water spotting. The minimum temperature for coating is 55°F. The pot life time at 60° is 2 hours and the cure time or set time is overnight. The pot life time at 77° is 55 minutes and the set time is 9 hours.

 

1 1/2 Quart Unit
$ 68.00
3 Quart Unit
$
1 1/2 Gallon Unit
$227.00
3 Gallon Unit
$361.90
   
Turbo Cure

Speeds up the cure time in colder temperatures.

4 oz.

$10.50